Product_Product_Dongguan KINZ Optoelectric Technology Co.Ltd.

English

Supply SMA905 ST Fiber Optic Connector End Sleeve Plastic Fiber Optic End Sleeve Fiber pigtail jacket Connector PIN Boot

The fiber optic tail sleeve is an important accessory for fiber optic connectors. In fiber optic connections, it protects the fiber end, enhances mechanical properties, and protects the fiber from external environmental influences (such as wear and corrosion). Common types include tail sleeves suitable for different fiber optic connectors such as ST and SMA905. They also have environmentally friendly flame retardant and high temperature resistance characteristics, which can meet the fiber optic connection needs in various scenarios.SMA905 Tail Sleeve,ST Tail Sleeve
Toslink Audio Transmitter DLT1411 Receiver 0629S1(RX) DLR 2411

Shenzhen Jinzhi Optoelectronics Technology Co., Ltd. has been deeply involved in the field of optical fiber communications for many years, focusing on the research and development, production and service of optical fiber solutions, with independent intellectual property technology and a nationwide service network. More importantly, Shenzhen Jinzhi Optoelectronics Technology Co., Ltd. takes "high speed, stability and security" as its concept, and provides full-scenario optical fiber communication solutions for home, enterprise, industry and other scenarios, helping to upgrade information transmission in the digital age.
Toslink Audio Transmitter 520nm (TX) DLT 1511 Transceivers 2511T Receiver 0629S1 (RX) DLR 2511

Shenzhen Jinzhi Optoelectronic Technology Co., Ltd. is a professional global supplier of plastic optical fiber and hard plastic coated quartz optical fiber (HCS\H-PCF 200/230μm), mainly in the field of wind power, photovoltaic field, electrical automation, Many equipment in the fields of industrial automation, automobile industry, medical treatment, sensing, aerospace, rail transit, smart home, etc. build the new generation of short-distance data transmission communication system "optical link system"
Toslink Audio Transmitter 850nm (tx) DLT 1811 Receiver 0629S1 (RX) DLR 2811

Toslink audio transmitter is an audio signal transmission device designed based on the Toslink (Toshiba Link) standard. Its core function is to convert digital audio electrical signals into optical signals and transmit them through optical fibers to achieve long-distance, low-interference transmission of audio data.
Toslink Audio Transmitter 650nm (TX) DLT 1611Receiver 0629S1(RX) DLR 2611

KINZ audio transceiver is an audio signal transmission device that uses Toslink interface technology. Toslink interface technology converts digital electrical signals into digital optical signals through optical transmission modules, and then these optical signals are transmitted to the optical receiving module through optical fibers. The optical receiving module then converts the optical signals back to the digital electrical signals, thereby realizing the transmission of audio signals. KINZ audio transceivers are compatible with most Toslink standard devices.
SMA905 Interface Analog Signal 3PIN Detector Coaxial Package Plug-in PD Photodiode

SMA905 interface analog signal 3PIN detector is a fiber optic detector that uses SMA905 fiber optic connector, can transmit analog signals and has three pins. It is usually used to detect optical signals or other physical quantities and convert them into continuously changing voltage or current signals for transmission. It has a wide range of applications in optical fiber communications, spectrum analysis and other fields.
KINZ Taidacent Voltage Optput Conactless Temperature Measurement Infrared Temperature Thermopile Sensor TS118-3

TS118 - 3 is a non-contact infrared temperature sensor produced by HLP of Germany. The TS118-3 infrared temperature sensor is used for temperature measurement in the medical and industrial markets.
Slingshot Fiber Optic Cable Telephone Line Telephone Cable Fiber Optic for Data Transmission

Slingshot fiber is a polarization-maintaining fiber with a special structure. Its name comes from the "bow-tie" shaped stress zone structure in the cross section of the fiber. This design introduces asymmetric mechanical stress to enable the fiber to maintain the polarization state of the transmitted light wave, making it suitable for polarization-sensitive optical systems.
New Product Assembly Patch Cord for Industry Assembling Optical Cables

Fiber optic patch cords are fiber optic cables with fiber optic connectors at both ends. They are used to connect optical signals between devices and are one of the most basic passive components in optical communication systems. Assembled fiber optic patch cords are finished patch cords that are assembled by manual or automated processes using optical fibers, connectors, protective covers and other components.
SMA905 Glass Fiber PCORD SMA-SMA OM1 SX 3MM 20M LSZH Orange

Glass optical fiber is an optical fiber made of high-purity silica as the main material. It has the advantages of ultra-low loss, high bandwidth, and strong anti-interference. It is a key transmission medium in the fields of optical communication and sensing.
FC/APC-E2000/APC/SX/MM/50/3.0/10M Glass Fiber Patch Cord LSZH/PVC Single Mode Patch Cord Fiber Jumpers

Glass optical fiber is an optical fiber with glass as the core transmission medium. It is also the most widely used type of optical fiber. Its essence is to use the light-guiding properties of glass to achieve long-distance transmission of optical signals through the principle of total reflection. It is a key basic component in modern communications, sensing, medical and other fields.
Plc Splitter HEBR 4503 -4513 HFBR-4501 Point Three Splitter Fiber Optic Splitters

Fiber optic splitter is an important passive optical device in optical communication system, which is mainly used to split one optical signal into multiple signals according to a specific ratio, or vice versa to merge multiple optical signals into one signal. It realizes signal distribution based on the principle of optical coupling and beam splitting, and can work without external power supply. It has the characteristics of compact structure, high reliability and low cost, and is one of the core components for building optical fiber network.