Product_Product_Dongguan KINZ Optoelectric Technology Co.Ltd.

English

KINZ Optical Fiber PMMA Decorative Twinkle 0.25mm~3.0mm Optical Lighting Fiber Cable Twinkle Starry Sky Decoration

A type of end emitting plastic fiber optic that can be illuminated by an LED light source machine. Low price and high quality, suitable for automotive, indoor, and outdoor decorative lighting. PMMA bare fiber is a new and fashionable lighting method.KINZ PMMA 0.25mmKINZ PMMA 0.5mmKINZ PMMA 0.75mmKINZ PMMA 1.0mmKINZ PMMA 1.5mm
KINZ PMMA Optical Fiber End Glow PMMA Plastic Optical Fiber Cable for Starry Sky Decoration

KINZ lighting plastic optical fiber is made of polymethyl methacrylate (PMMA), which has good flexibility and is used for lighting and decoration. The optical fiber end light is often used for car and house starry sky ceiling decoration. The optical fiber can also be dotted with light from the side, which is often used to decorate banquet halls, wedding scenes, outdoor decorations, etc. The color and brightness of the optical fiber are determined by the light source machine.KINZ PMMA 2.0mmKINZ PMMA 2.5mmKINZ PMMA 3.0mm
D80 fiber pigtail 1000um laser power probe test 1500um pigtail 1200um pigtail alignment fiber for test equipment

This high-performance hair removal test and calibration pigtail is a fiber optic component specially used for testing, calibration and system maintenance of holmium laser hair removal equipment. Its core adopts high-power resistant fluoride fiber or special coated quartz fiber to ensure efficient transmission of the wavelength of holmium laser while maintaining low loss and high beam quality.model:D80 connector 1000um*15cm,D80 connector 1200um*15cm,D80 connector 1500um*15cm,SMA connector 300um*15cm,SMA connector 600um*15cm
Okuma H-PCF Fiber Optic Cable 4-core 8-coreH-PCF Optical Cable HPCS CABLE Okuma H-PCF Fiber Optic Cable 8-core Pcf Fiber Optic Cable

Refers to an optical cable that contains 4 or 8 independent optical fiber cores. It is designed to meet the needs of medium-capacity two-way communication, multi-link parallel transmission or redundancy. Structurally, 4 or 8 optical fibers are usually integrated in the same sheath, with reinforcement components and protective layers, suitable for scenarios where multiple optical signals need to be transmitted simultaneously.Model:4-core optical cable，8-core optical cable
KINZ developed Laser hair removal fiber New Candela fiber for Laser Hair Removal

SMA905 hair removal fiber is a special fiber using SMA905 connector, mainly used in the field of laser hair removal and beauty, which can achieve efficient laser energy transmission.Combined with a special coating process, the laser energy can be accurately directed to the target area of hair follicles, which not only ensures hair removal efficiency but also reduces thermal damage to surrounding skin tissue. It is a key component in laser hair removal equipment to ensure stable energy transmission and safe treatment.
Hair removal fiber 1500um high power with 755nm 1064nm coating New Candela fiber Used for beauty laser machine

What hair removal instruments are used with 1500um core diameter hair removal optical fiber：High power semiconductor laser hair removal deviceLong pulse Nd: YAG laser hair removal deviceComposite laser hair removal device
Customizable Laser Fiber Laser Ultra-Picosecond Fiber Freckle Removal Fiber

This is an energy transmission component specially designed for holmium laser freckle removal equipment. It uses high-purity quartz as the fiber core and cooperates with a specific connector to efficiently transmit holmium laser and accurately guide the energy to the target area of freckles to achieve targeted destruction of pigment particles. It is a key optical fiber component in the laser freckle removal system that connects the equipment and the treatment area.
Quartz flexible light guide Holmium NA0.22 with SMA905 With sapphire for Laser lipolysis

The lipolytic fiber transmits laser energy of a specific wavelength into the subcutaneous fat layer through a thin fiber optic cable. After the laser energy is absorbed by adipocytes, it is converted into thermal energy, causing the adipocyte membrane to rupture and release components such as fatty acids, glycerol, and water.
D80 Energy Fiber Connector YAG Laser Fiber Connector

D80 connector is a widely used fiber optic connector for transmitting high-power laser signal. We can provide aperture adjustment service.
SMA905 standard interface Polyimide optical fiber conical/bare fibers for endolaser facelifting, urology surgery treatment

This product is a special optical fiber that uses polyimide material as the cladding/sheath. It is a high-performance optical transmission component designed for beauty laser equipment (such as hair removal, skin rejuvenation, freckle removal, etc.). Its core conducts laser energy through quartz or special glass fiber, and the outer polyimide coating provides excellent high temperature resistance, mechanical strength and biocompatibility, meeting the stringent requirements of medical beauty scenarios.
Industrial HFBR4506Z Fiber Optic Patch Cord Used In Solar Farm Power Generation System HFBR4516Z NLWC-02 plastic optical fiber avago VL connector V-PlN double

With innovative technology at its core, KINZ is committed to providing customers with high-performance, high-reliability connectivity solutions. We continue to break through the boundaries of technology to help your business move towards an intelligent future.
SMA 905 Fiber for Endolaser 980- 1470nm Endolaser Fiber Optic for Hemorrhoids EVLT Lipolysis

When dissolving grease in a ring fiber, a specific wavelength laser, such as a laser in the 1470nm band, is usually used. The laser is transmitted to the subcutaneous fat layer through a circular fiber optic cable, and using the theory of plasma photothermal dissolution, the fiber optic cable emits light in a 360 ° circular shape, making the laser irradiation area larger. After the laser energy is absorbed by adipocytes, it is converted into heat energy, causing the rupture of the adipocyte membrane, uniform liquefaction of adipocytes, and then excreted from the body through natural metabolism.