Servo fiber is a fiber optic sensor or fiber optic line used to transmit optical signals in servo systems. Its working principle is to use the optical signal emitted by the light source to transmit through the optical fiber, and finally the receiver converts the optical signal into an electrical signal to achieve information transmission and physical quantity detection. In this process, modulated light is usually used to detect the change of physical quantity, so as to obtain high-precision signals.QG-G50-2C-5M-B-LL, QJ71GP21-SX module, Mitsubishi PLC servo optical fiber

Plastic fiber optic connectors are used for arc protection, which means that in the arc protection device of the power system, plastic fiber optic connectors are used to achieve the connection and transmission of optical signals between arc sensors and main control units, expansion units and other devices. Plastic fiber optic connectors play a key role in this process. They efficiently and stably transmit the optical signals collected by the arc sensor to the processing unit of the protection device through plastic optical fiber for analysis and judgment, and then trigger corresponding protection actions, such as sending trip signals, to quickly remove faults and ensure the safe operation of the power system.AFBR-S10PS010Z AFBR-S10PS011Z

SMA905 (also known as SMA 905 or SMA-905) is a common radio frequency (RF) coaxial connector standard, widely used in high-frequency signal transmission.sma905 female,sma905 probe,Female assembly, sma905 connector 1.0mm, ST connector 1.0mm

SMA905 is a common type of fiber optic connector, and its ferrule is made of ceramic or metal. Fiber optic products such as SMA905 patch cords have the characteristics of high precision, high damage threshold and high ferrule concentricity, which can ensure the transmission of optical signals with low loss, high speed and high accuracy. In the arc protection system, it can quickly and accurately transmit the optical signal detected by the arc sensor to the main control unit, so that the main control unit can make decisions in time and issue corresponding protection action instructions, thereby realizing rapid detection and protection against arc faults and protecting the safety of power equipment and personnel.fluorescent fiber 2.0 RED, sma905 jumper, ST-ST jumper

The use of optical fiber for arc protection means that in the arc protection system, optical fiber is used as a signal transmission medium to transmit the optical signal detected by the arc sensor to the main control unit and other equipment to achieve rapid detection and protection of arc faults.1.0 2.2 cable 1m，Sensors 1 pcs，st pigtail 1m，st pigtail 1m，ST large core cable 1m

The ST arc protection device is a device used in power systems to quickly detect and protect arc faults based on the principle of dual judgment of current and arc light. It determines whether an arc fault has occurred by real-time monitoring of the current and light changes inside the switch cabinet. When an abnormal arc light is detected and the current exceeds the set threshold, the protection device will quickly issue a trip command to cut off the fault power supply, thereby preventing the fault from expanding and protecting the safety of equipment and personnel.1.0 2.2 cable 1m，Sensors 1 pcs，ST-SC Cable 1M，POF1000um_ST 1m，ST (BFOC POF) 1m

In the arc flash detection system, the V-pin interface fiber optic connector connects the special light detection sensor to the signal transmission fiber. When an arc flash occurs, the strong light generated is sensed by the light detection sensor, which converts the light signal into an electrical signal, and then transmits the electrical signal to the control unit or monitoring equipment through the optical fiber connected to the V-pin interface fiber optic connector for processing and analysis. Because the optical fiber has good insulation performance, anti-electromagnetic interference ability and low-loss signal transmission characteristics, the signal obtained by the light detection sensor can be accurately and quickly transmitted to the remote monitoring equipment, thereby realizing the timely detection and alarm of arc flash events, so as to take appropriate protective measures to reduce the damage caused by arc flash to equipment and personnel.1.0 2.2 cable 1m，4503 or 4513 connector，4503 4513 Jumper 1m，Sensors 1 pcs

Fiber Optic Sensor Patch Cable is a prefabricated optical cable assembly designed specifically for fiber optic sensing systems. It consists of special optical fibers terminated with optical fiber connectors and is used to accurately connect sensing equipment and measuring instruments. Its core function is to ensure the complete transmission of optical signals while meeting the special requirements of the sensing system for mechanical stability, environmental adaptability and measurement accuracy.Sensing fiber panasonic ft-49 panasonic FD-66 Reflective FD-45G Coaxial reflection type ft-49 ，FD-66 ，FD-45G

POF-based Drug Detection Fiber is a special optical fiber detection system that uses polymer optical fiber as a sensing medium. It achieves specific identification and detection of drug molecules through optical fiber surface modification or structural design. This sensing technology combines the flexibility of plastic optical fiber with detection principles such as surface plasmon resonance fluorescence quenching, and has the characteristics of rapid on-site detection, high sensitivity and strong concealment.

A sensing fiber jumper is a functional fiber optic component used to connect light sources, detectors, demodulation devices or sensing optical cables in a sensing fiber optic system. Its core function is to achieve flexible connection and signal transmission of optical paths in a fiber optic sensing network, while meeting the special requirements of sensing applications for optical performance, mechanical stability and environmental adaptability.EYENCEFU-35FA

It is a functional optical cable system that combines optical sensing technology with special optical cable structure. Its essential feature is that the optical fiber itself is used as a sensitive element to achieve real-time monitoring of physical quantities through modulation and demodulation of optical signals. Different from traditional communication optical cables, it realizes the functional integration of "transmission" and "sensing" and is the core carrier of the new generation of intelligent perception networks.1.0 2.2mm 1m

It is a special optical cable that combines the optical transmission characteristics of optical fiber with the sensing function. Its core is to use the sensitive characteristics of optical fiber to external physical quantities (such as temperature, strain, vibration, pressure, magnetic field, etc.) to achieve real-time monitoring of the environment or structure.0.25*8 cores 500m，0.25*9 cores 500m